Edimax RG21S WiFi Router setup, troubleshooting and review

The edimax rg21s is a home wifi roaming router with MU-MIMO. It is specially designed to provide the wifi network connectivity. Usually, the edimax wifi router is used in the home. It fulfills all the requirements needed for wifi. On the other hand, the edimax rg21s wifi router is ultra high-speed concurrent dual-band router that max speed up to 800 Mbps (2.4 GHz) and 1733 Mbps (5 GHz) with 802.11ac Wi-Fi standard and backward compatible with 802.11a/b/g/n standards. It has four external antennas that manage the wifi network in the whole home. This router supports up to 10 SSIDs (5 x 2.4 GHz & 5 x 5 GHz) and provides security to protect confidential or critical network resources. The edimax wifi router abolishes the dead zone in the corner of the home.

The setup of the edimax ac2600 wifi router is simple. It has MU-MIMO(Multiple User – Multiple Input Multiple Output) technology that serves multiple devices simultaneously. By which you can stream 4K videos, play gaming console and other online work without any buffering.

Installation of the edimax RG21S wifi router

The edimax wifi router provides ultimate performance with mimo technology. It has more network coverage, that means it covers all the area of the home like room to the kitchen and even backyard. If you want to enjoy the wifi connectivity of the edimax router then you need to install it.

• Primarily, unbox the RG21S router from the packaging box and check if it comes with the following components like power adapter, ethernet cable, antennas, CD-ROM, manual etc.
• Then, place the edimax router from where the better range comes to the whole house.
• Here, set the antennas in the proper way. The edimax ac2600 router has four external antennas.
• Presently, connect the router to the modem using the ethernet cable.
• Take an ethernet cable, plug the one end of the cable into the modem backside and the other end plug into the router’s ethernet port.
• Take a power adapter and connect the one end into the router’s backside and other end plug into the power circuit.
• Turn on the wifi of your device(computer, laptop or mobile phone) and connect the edimax wifi network using the password.

Now the steps of the edimax rg21s installation is done. You can seamlessly enjoy the wifi connectivity in the whole home and login the router without any trouble.

How to access the login page of edimax rg21s wifi router?

The edimax wifi extender gives a steady connection in long-distance areas. If you want to login the rg21s wifi router without any hassle then follow the somes steps. The edimax router rg21s login steps are given below.

• Firstly, make sure your device like computer or laptop is properly connected to the edimax wifi network, wired or wirelessly.
• Secondly, open the web browser on your device.
• Type rg21s router’s IP address in the search bar, the IP address is 192.168.1.1 or edimax.setup, hit enter.
• In a while, the login page appears on the device screen, there are 2 text fields in the login page: username and password.
• Then you can type the default login username ID and password in their fields.
• Finally, click the section “login”.

Now the login steps of the edmix ac2600 wifi router is finished. These were some of its steps which you can also follow without any obstacle.

Manual of the edimax RG21S wifi router

The edimax rg21s router is wireless and it has four external antennas. It provides an ultra-fast wifi network throughout the whole home, by which you can seamlessly stream videos without any loading. If you want to know more information about the edimax ac2600 router then you need to read the edimax rg21s manual. Manual is that all the information is there about the wifi router like interface is 1 x RJ-45 10/100/1000Mbps WAN port, button WPS/Reset buttons, LED indicator Power, antennas is 4 x antennas (4 x detachable antennas: 2 x 2.4GHz and 2 x 5GHz & 4 x internal antennas: 2 x 2.4GHz and 2 x 5GHz ), memory is 16MB NOR Flash or 256MB RAM, power adapter DC 12V, 1.5A and dimension is 160(W)mm x 115(D)mm x 31(H)mm. By reading this manual, you can find out all the information about the edimax rg21s wireless router.

Web-based setup of the edimax wifi router

If you want to Setup the rg21s wifi router setup then it is very unpretentious. It takes 4-5 minutes to set up the router. If you want to completely edimax rg21s setup then follow some steps. These steps are as follows.

• First and foremost, power On the edimax router by pressing the power button and wait until the LED turns on solid green.
• Here, connect the router and computer, wired or wirelessly.
• Then, login the account through IP address, username and password.
• Now, input the username and password in their fields and click “OK”.
• Click the “general setup”.
• Then, click the “wireless” option. Under this option select “security setting”.
• In this setting, change encryption and select WPA2, enter your wireless security key in their field password must be at least 8 characters.
• After these settings, click “apply” and reboot the router. You can wait about 30 second

Now the setup steps of the edimax rg21s wifi router is successfully complete. These were the few steps that you too can easily follow without any hitch.

Troubleshooting steps for edimax rg21s dual band router

The edimax rg21s wifi router is boosted wifi coverage that is equipped with four external antennas. You can enjoy speeds up to 4X faster than traditional routers. But many times edimax rg21s not working they cause some issues. You can easily resolve these issues with troubleshooting steps.

• The edimac ac2600 router is not working then you should unplug the router into the electric outlet and power OFF for 10-20 seconds. Then again plug in the electric outlet and power ON by pressing the power button.
• Ensure the antennas of the rg21s router are properly set, if you cannot properly set the antennas then your router is not working and also not providing stable range.
• Due to overheating the router is not working, you should place the DB router in the ventilated, cool and airy area.
• Sometimes the web-based setup page is not accessed on the edimax router then you should verify you can use the proper IP address. You can use the other web browser to access the setup page. Clean the cache history of the browser.
• You need to verify the firmware update of the router. If you do not update the firmware then your rg21s router is not working.
• Make sure the power LED, if the LED indicator flashes red light that means connection is not good. If the LED indicator flashes green light that means connection is good, you enjoy the wifi network.
• In the eventually, follow all the above steps but if your router is still not working then you should reset the rg21s wifi router.

Edimax rg21s review

The edimax rg21s ac2600 router is wireless speed up to 1,733 Mbps on 5GHz and up to 800Mbps on 2.4GHz. It has four antennas and MU-MIMO delivers faster speed for all connected devices over a wide area of home. This technology allows connecting up to 15 devices at a time and provides stable wifi connectivity to all the devices which are connected. The edimax rg21s wifi router provides ultimate wifi connectivity by which it says goodbye to the wifi dead zone and buffering. It also has beamforming technology that focuses signal strength on client devices for stable, reliable connection. This router is exceptional wireless performance which enables online gaming and HD video streaming at the same time, while large files can be shared with multiple devices. That means the edimax rg21s wireless router is a superior device for wifi network connectivity.

FAQs

How do I reset the edimax rg21s router?

To reset the rh21s dual band router by pressing the reset button. The reset button is on the backside of the edimax router. Then press and hold the reset button for 9-10 seconds. Then you can hear a beep and release the button. And the power LED indicator flashes orange light its mean reset is successful.

Can I update the firmware of edimax wifi router?

To update the edimax rg21s firmware, then you can login the account with default username and password. Then go to the setting and click “system tools”. Under this, select “firmware updater” and click “browse” to upload the firmware file. Here upload the file click “upgrade”. Now the firmware update process is start, you don’t turn off the device.

How do I change the edimax rg21s password?

If you want to change the password then you should login the account with 192.168.1.1. Now go to the setting and click the option “wireless setting”. Under this setting click “change password”. Then you can type a new password in their field and click “save”.