How to change the SSID and Wi-Fi password on an Edimax router
Changing the wireless network name and password on an Edimax router is a useful way to personalize your home network and improve its security. The SSID is the name displayed when phones, computers, televisions, and other devices search for nearby Wi-Fi. The wireless password controls which devices are allowed to connect.
Edimax router menus vary slightly by model and firmware version, but the general process is similar. You connect to the router, open its web-based setup page, sign in with the administrator credentials, and edit the wireless settings. Depending on the model, the configuration page may be available through an Edimax web address or a private IP address such as 192.168.2.1.
Before making changes, connect to the router over Ethernet if possible. A wired connection prevents the computer or phone from losing access while the wireless network name and password are being updated. If Ethernet is not available, use the current Wi-Fi connection and be ready to reconnect after saving the new settings.
Check the connection and router details
Start by connecting your device to the Edimax router. Use an Ethernet cable from a LAN port on the router to a computer for the most reliable setup session. If you are using a phone or laptop, join the existing Edimax wireless network instead. Avoid configuring the router while connected to a guest network, a neighboring access point, or a Wi-Fi extender that is not currently linked correctly to the main router.
Find the router’s administration address before opening the setup page. Common Edimax gateway addresses include 192.168.2.1, 192.168.1.1, and 192.168.0.1. Some models also use setup.edimax.com when the device and computer are connected to the same local network. The correct address is often printed on a label underneath the router or listed in the quick installation guide.
To identify the active gateway on a computer, open the network connection details and look for “Default gateway” on Windows or “Router” in macOS. On a mobile device, open the connected Wi-Fi network’s information panel and locate the router or gateway address. Enter that address directly into the browser’s address bar rather than a search engine field.
Open the Edimax setup page
Launch a current web browser and enter the Edimax setup address, including the full IP format, such as http://192.168.2.1. If the page does not load, try another commonly used Edimax address or use setup.edimax.com. The browser may display a privacy warning if the router uses a local, self-signed certificate. This is common with older administration interfaces; verify that you are connected to your own router before proceeding.
The login screen requests an administrator username and password. Older Edimax models frequently use a default combination printed in the manual or on the device label, while some newer models require credentials created during the initial installation. The wireless password and router administrator password may be different, so do not assume the Wi-Fi key is the login password.
If the default credentials do not work, check whether the password was changed by a previous installer or household member. Repeated guesses can cause a temporary lockout on some firmware versions. A factory reset is a last resort because it erases the internet connection, wireless, and access-point settings. If a reset becomes necessary, hold the recessed Reset button for the period specified in the Edimax manual, then repeat the initial router setup.
Edit the wireless network name and password
After signing in, open the menu labeled Wireless, Wi-Fi, Wireless Settings, or Basic Settings. Dual-band Edimax routers may show separate pages for 2.4 GHz and 5 GHz networks. Some interfaces provide a single setting that controls both bands, while others allow an individual SSID and password for each frequency.
Locate the SSID or Network Name field and replace the existing value. Choose a name that is easy to recognize but does not reveal your address, family name, apartment number, or router administrator details. A unique name also helps distinguish your private network from nearby networks and from an Edimax extender.
Next, find the security mode and wireless key field. Select WPA2-Personal, WPA2-PSK, or WPA2/WPA3-Personal when the model supports it. Use AES or CCMP encryption rather than outdated TKIP. WEP and open, password-free wireless should not be used for a normal home network because they provide weak or no meaningful protection.
Enter a strong Wi-Fi password with at least 12 characters when possible. A long passphrase made from several unrelated words is easier to type accurately than a short collection of predictable substitutions. Avoid names, birthdays, telephone numbers, street addresses, and passwords reused on email, banking, or shopping accounts. Check the password visibility option if available so that typing mistakes can be spotted before saving.
Select settings that fit your devices
The best configuration depends on the Edimax model, the age of your wireless devices, and whether the router operates as a primary gateway or an access point. The following settings provide a practical starting point for most home networks.
| Setting | Recommended choice | Important detail |
|---|---|---|
| SSID | A unique, recognizable network name | Avoid personal information and confusing punctuation |
| Security | WPA2-Personal or WPA2/WPA3-Personal | Use the strongest option supported by every important device |
| Encryption | AES or CCMP | Avoid TKIP unless an old device requires it temporarily |
| Wi-Fi password | A unique passphrase of 12 or more characters | Do not reuse an important online account password |
| 2.4 GHz band | Enabled for range and older devices | Usually offers better coverage through walls |
| 5 GHz band | Enabled for speed and lower congestion | Provides faster performance at shorter distances |
| SSID visibility | Enabled for ordinary home use | Hiding the name does not provide real security |
| WPS | Disabled after installation when practical | Reduces exposure from push-button or PIN-based pairing |
If the router has separate SSID fields for each band, you can give both bands the same name and password. This makes the network simpler for users and lets compatible devices choose a band automatically. Alternatively, names such as HomeNet-2G and HomeNet-5G make it easier to select a specific frequency while testing range or performance.
Avoid changing advanced items such as channel width, transmit power, DHCP, VLAN, or WAN settings during a basic password update. Those options can affect internet access and local network communication. If the Edimax is configured in access-point mode, change the wireless settings on that device only if you intend to create a separate Wi-Fi network; otherwise, keep its SSID and security settings synchronized with the primary router when appropriate.
Save the changes and reconnect devices
Click Apply, Save, Submit, or a similarly labeled button after entering the new SSID and password. The router may take several seconds to write the configuration and restart its wireless radios. Do not unplug the router or close the browser during this process unless the interface clearly reports that the update is complete.
The current Wi-Fi connection will normally disconnect as soon as the new settings become active. On a computer connected by Ethernet, the setup page may remain available even though wireless clients disappear. On a phone or laptop, open the Wi-Fi list, select the new network name, and enter the new wireless password. Remove or forget the old saved network profile if the device repeatedly attempts to use outdated credentials.
Reconnect devices one at a time and verify that each receives an IP address and can browse the internet. Smart televisions, printers, cameras, streaming boxes, smart speakers, and home automation equipment may need to be configured individually. Some older devices store the SSID and password in their own setup applications, so updating the router does not automatically update those devices.
If both wireless bands use the same SSID, confirm that devices can move between 2.4 GHz and 5 GHz normally. If you assigned different names, test each network in the areas where it will be used. A device that is far from the router may perform more reliably on 2.4 GHz, while a nearby modern laptop or phone may achieve higher speeds on 5 GHz.
Resolve common Edimax Wi-Fi problems
A setup page that will not open is usually caused by using the wrong gateway address or connecting to the wrong network. Check the device’s current network details, turn off mobile data temporarily on a phone, and try the gateway shown by the router connection. If the browser automatically changes the address, type the local IP again and confirm that no VPN or proxy is interfering with local access.
If the new SSID does not appear, wait for the router to finish restarting and refresh the Wi-Fi list. Check whether the wireless radio was disabled in the settings and confirm that the selected band is enabled. Very old devices may not display a 5 GHz network, while some channels are unavailable to particular devices or regional versions of the router.
A password rejection can result from a typing error, an unsupported security mode, or a device that cannot use WPA2 or WPA3. Re-enter the key carefully, check capitalization, and test with a known compatible phone or laptop. If modern devices connect but an older printer does not, update the printer firmware or use WPA2-Personal with AES if that is supported by the Edimax model.
If internet access stops after the change, distinguish between a Wi-Fi problem and a broadband problem. First check whether a device is connected to the new SSID and has a local IP address. Then inspect the router’s WAN or Internet status page. Changing the SSID and Wi-Fi password should not normally alter WAN settings, but an accidental change to another menu may require restoring the original internet configuration.
Keep the updated network secure
A new wireless password is most effective when the router’s administrator account and firmware are also maintained. The Wi-Fi key protects wireless access, while the administrator password protects the configuration interface. Someone who can sign in to the router settings may change the SSID, redirect traffic, disable security, or alter DNS settings even if the Wi-Fi password is strong.
Use these practical habits after updating the network:
- Set a separate administrator password that is not the same as the Wi-Fi password.
- Install current firmware from the correct Edimax support page for the exact model and hardware revision.
- Disable remote administration unless you specifically need it and understand the security implications.
- Review the connected-client list for unfamiliar phones, computers, cameras, or other devices.
- Store the new SSID and password in a secure password manager rather than on an exposed note beside the router.
Keep a record of the final wireless settings, including whether the 2.4 GHz and 5 GHz bands share one name. This is especially useful when adding an Edimax extender or access point later. An extender may need the updated password entered again through WPS or its browser-based installation wizard, and it may continue broadcasting the old network name until its own configuration is changed.
When the update is complete, test the network from several rooms and with the devices that matter most. Open the Edimax administration page again to confirm that the wireless security mode and SSID were saved correctly, then close the browser session. Use the Edimax setup instructions for your exact model if menu names, login details, or reset behavior differ from the general process described here.