How to Change the LAN IP Address of Your Edimax Router
The LAN IP address is the local network address used to reach your Edimax router’s administration panel. It is different from the public IP address assigned by your internet service provider. Devices inside your home or office use the LAN address to communicate with the router, obtain network settings, and access configuration tools.
Most Edimax routers use a private address such as 192.168.2.1, 192.168.1.1, or 192.168.0.1, although the exact value depends on the model and its current configuration. Changing this address can resolve an IP conflict, match an existing network range, or make a secondary router work correctly as an access point.
The process is generally straightforward, but the router will restart or briefly disconnect after the new address is applied. You will then need to sign in to the setup page using the updated LAN IP address. Preparing the new address carefully helps prevent duplicate addresses and avoids losing access to the management interface.
Why Change The Router’s LAN Address
A common reason to change the local IP address is a conflict between two networking devices. For example, a modem-router supplied by an internet provider may already use 192.168.1.1, while an Edimax router connected behind it uses the same address. When both devices claim the same gateway address, the browser may open the wrong administration page or the connection may become unreliable.
Changing the Edimax router to another private address, such as 192.168.2.1, separates the two devices. The first router can continue managing its own network while the Edimax device operates on a different subnet. This arrangement is especially useful when connecting routers in series or setting up a secondary wireless network.
A LAN IP change may also be required when selecting access-point mode. In that arrangement, the main router normally provides DHCP services and assigns addresses to clients. The Edimax device still needs a unique management address, but it should sit within the main network’s address range without duplicating the primary router’s IP.
The new address does not change your internet subscription, public IP, Wi-Fi password, or wireless network name by itself. It only changes the local address used to reach the Edimax interface and identify the device on your network.
Prepare Before Editing Network Settings
First, identify the address currently used by the Edimax router. Check the product label, quick-start guide, or the gateway information shown on a connected computer or phone. You can also try common addresses in a browser, provided the device is connected to the Edimax network. The Edimax setup guide can help you locate the correct login page and identify the relevant setup options for different router and extender models.
Connect to the Edimax router before making the change. A wired Ethernet connection is preferable because it is less likely to drop while settings are being saved. If you use Wi-Fi, stay close to the router and avoid switching networks during the configuration process.
You should also identify the LAN range used by the main router, if another gateway is present. On a typical home network, the primary router may use 192.168.1.1 and distribute addresses from 192.168.1.100 through 192.168.1.200. In that case, the Edimax router should use a unique address in the same subnet when it functions as an access point, or a different subnet when it acts as a separate router.
Write down the current settings before changing them. Record the existing LAN IP address, subnet mask, DHCP range, wireless name, and administrator credentials. This information makes recovery easier if the new configuration does not behave as expected.
Open The Edimax Administration Page
Open a browser on a connected device and enter the router’s current LAN IP address in the address bar. Type the address directly, without adding it to a search engine. A local address normally begins with http:// or may open automatically when entered in a browser.
Sign in with the administrator username and password. These credentials may differ from the Wi-Fi password. If the router has never been configured, the default login details may be printed on its label or included in the documentation. On some models, an initial setup wizard asks you to create a new administrator password.
The location of the LAN controls varies between Edimax firmware versions. Look for menus named Network Settings, LAN, Local Area Network, Internet, Advanced Settings, or TCP/IP Settings. The required page usually displays the router’s IP address, subnet mask, DHCP server status, and the address pool assigned to clients.
Do not edit the WAN, Internet, or wireless IP fields by mistake. The LAN IP controls access from devices inside your network. The WAN section relates to the connection between the Edimax router and the modem, upstream router, or internet service.
Select A Compatible Private Address
An IPv4 LAN address contains four number groups separated by periods. Private ranges commonly used in homes and small offices include 192.168.0.0 through 192.168.255.255, 10.0.0.0 through 10.255.255.255, and 172.16.0.0 through 172.31.255.255. Most Edimax installations use a 192.168.x.x address because it is easy to recognize and compatible with standard home networking equipment.
The subnet mask determines which devices are considered part of the same local network. The common value 255.255.255.0 allows addresses such as 192.168.2.1 through 192.168.2.254 to share the same network portion. The router itself should use an address outside the DHCP pool, or the DHCP pool should be adjusted so the router address cannot be assigned to another device.
Choose an address that does not duplicate the upstream router or another fixed device. If the main gateway is 192.168.1.1, you might choose 192.168.1.2 for an Edimax access point, provided that address is not already in use. If the Edimax remains a separate router behind the main gateway, using 192.168.2.1 is often more appropriate.
| Network arrangement | Primary gateway | Suitable Edimax LAN address | DHCP guidance |
|---|---|---|---|
| Edimax is the only router | 192.168.2.1 | 192.168.2.1 | Enable DHCP on Edimax |
| Edimax is an access point | 192.168.1.1 | 192.168.1.2 | Disable DHCP on Edimax |
| Edimax is behind another router | 192.168.1.1 | 192.168.2.1 | Use a separate subnet |
| Existing network uses 10.0.0.1 | 10.0.0.1 | 10.0.0.2 or another unused address | Match the network design |
| Address conflict is suspected | Existing address duplicated | Select an unused private address | Check the full address pool |
The correct choice depends on the operating mode. A router mode installation normally separates the LAN from the upstream network, while an access point extends the existing LAN and should use a compatible address range. If you are uncertain, inspect the main router’s LAN settings before changing the Edimax configuration.
Change The LAN IP Address
On the LAN settings page, locate the field labeled IP Address, Local IP Address, Router IP, or LAN IP. Enter the new private address in the correct format. For example, you could change 192.168.2.1 to 192.168.2.254, provided the address is available and suitable for your network.
Check the subnet mask before saving. In a standard home setup, it will often remain 255.255.255.0. The gateway field may be left blank or may need to contain the upstream router’s address, depending on the Edimax operating mode and firmware design. Avoid changing additional fields unless the network layout requires it.
If the Edimax router is providing DHCP, review the DHCP start and end addresses after changing the LAN IP. They should belong to the same subnet as the new router address. For example, an Edimax router set to 192.168.2.1 might distribute addresses from 192.168.2.100 to 192.168.2.200. A range such as 192.168.1.100 to 192.168.1.200 would be incompatible with that LAN address.
When the settings are correct, select Apply, Save, or Submit. The router may display a warning and restart. During this period, the Wi-Fi network may disappear and wired devices may lose connectivity. Do not unplug the router or close the browser while firmware is saving the configuration.
Reconnect Using The New Address
After the router restarts, your device may still remember the old network details. Wait a minute or two, then disconnect and reconnect the Ethernet cable or join the Edimax wireless network again. A phone or computer may need to renew its IP address before it can communicate with the router at its new location.
Enter the new LAN IP address in the browser. If you changed the router to 192.168.2.254, use that exact address rather than the previous one. The login screen should appear, allowing you to confirm that the change was successful.
If the page does not open, verify that the device received an address in the same subnet. A router using 192.168.2.1 should normally assign the client an address beginning with 192.168.2. If the client still has an old address, renew its network lease or restart its connection.
Some Edimax models may redirect you to an HTTPS version of the management page or display a browser security warning for a local certificate. This can be normal on a private router interface. Confirm that you are connected to the correct local device before proceeding.
Troubleshoot Access And Connectivity
If the new address is unknown or inaccessible, check the connected device’s default gateway. On Windows, open Command Prompt and run ipconfig. On macOS or Linux, inspect the active network connection details or use the route command. On mobile devices, open the connected Wi-Fi network’s information page. The gateway shown there is often the router’s current LAN IP.
A duplicate address can cause intermittent access, failed logins, or devices appearing offline. Disconnect other routers, network switches with management addresses, and manually configured devices while testing. If access returns after another device is removed, assign each device a distinct address.
When Edimax is used as an access point, disable its DHCP server unless the network design specifically requires it. Two active DHCP servers can give clients conflicting gateways and DNS settings. The main router should generally assign addresses, while the Edimax unit supplies wireless connectivity and remains available at its fixed management IP.
If the router becomes unusable after an incorrect change, try connecting directly with Ethernet and assign the computer a temporary static IP in the expected range. If that fails, a factory reset may be necessary. Resetting erases wireless settings, administrator credentials, internet settings, and other custom configuration, so use it only after less disruptive recovery methods have failed.
Keep The New Configuration Reliable
Once the LAN address is changed, update any bookmarks, network diagrams, device management notes, and monitoring tools that refer to the old address. If you use a printer, camera, network storage device, or smart-home hub with manually entered gateway information, confirm that it still points to the correct router.
These practices help maintain a stable Edimax network:
- Reserve a unique management address outside the automatic DHCP pool when possible.
- Keep the Edimax LAN address and subnet mask aligned with its selected operating mode.
- Use a different subnet when the Edimax functions as a separate router behind another gateway.
- Disable the secondary DHCP server when the Edimax operates as an access point.
- Store the new LAN address and administrator credentials in a secure location.
Changing the LAN IP does not automatically improve wireless range or internet speed. Its main purpose is orderly local addressing and reliable access to the router’s management interface. Wireless coverage can be handled separately through channel selection, placement, antenna settings, or an appropriately configured Edimax extender.
After testing, sign in once more using the new address and review the status page. Confirm that the router has an active LAN connection, connected clients are receiving valid addresses, and internet access works from several devices. Save a copy of the final settings if the firmware provides an export or backup option.
Apply the new address carefully, reconnect to the correct network, and use the updated LAN IP for all future Edimax administration. A few minutes spent checking the subnet, DHCP range, and gateway relationship can prevent recurring conflicts and keep the router accessible as your network grows.