Posts

  1. Understanding the Flashing Green Light on Your Edimax Extender During SetupEdimax range extenders are a common sight in Australian households, particularly in homes where the NBN connection box sits in a home office at the front of…
  2. How to Check the Signal Strength Between an Edimax Extender and RouterA solid wireless link between your Edimax extender and the main router is the backbone of any reliable home network. If that link is weak, every device…
  3. Blocking a specific device from the internet on an Edimax routerAustralian households often juggle a dozen or more connected gadgets, from smart TVs in the loungeroom to study laptops in the kids' bedrooms. With NBN fibre,…
  4. Configure Your Edimax Extender Manually Through a Web BrowserWhen Wi-Fi coverage in your home refuses to stretch into the back bedroom or the granny flat out the back, a wireless range extender often becomes the most…
  5. Configure an Edimax Router for WPA3-Only Wi-FiWPA3-Only mode gives a compatible Edimax wireless network a stronger security baseline than older WPA2 settings. It uses WPA3-Personal, also called WPA3-SAE,…
  6. Edimax Extender Green Light but No Internet AccessAn Edimax Wi-Fi extender can show a steady green light while connected devices still report “No Internet.” This usually means the extender has power and may…
  7. How to Change the IP Address of an Edimax Router from 192.168.1.1A quiet afternoon in suburban Brisbane, the NBN box blinking steadily on the wall, and a household of devices all fighting over the same gateway address. That…
  8. Setting Up an Edimax Router with a Cable Modem HostnameAn Edimax router can usually share a cable modem connection with very little manual configuration. The exception is a service that identifies the customer’s…
  9. Enable IGMP snooping on your Edimax router to improve IPTV streamingModern home networks in Australia carry far more multicast traffic than they once did. With Foxtel over NBN, Kayo Sports streams during weekend AFL matches,…
  10. Fixing a Solid Red LED on Your Edimax Extender After SetupThe solid red LED on an Edimax extender after setup is a frustrating experience, particularly when the device seemed to work during the initial pairing or…